4
5.1.2 CLR key
As Clear means, the CLR key can be used to cancel the previous step of input
information on the command line.
5.1.3 Odd / Even keys
When the input command has been finished, press Odd (Even) key, and then
press the “Enter” key, all the selected channels will output the levels only of the
Odd (Even) Channels. For example, input “1>100@80 Odd”, and press the
“Enter” key, LCD will show you:
Ch001>80 00 80 00 80
Ch006>00 80 00 80 00
Cmd : 1>100@80
Odd
Act : Done
That means the output at 80% level of all channels No. 1,3,5,7,9,
……
97,99.
5.1.4 Up / Down
keys
Up/Down keys can be used to adjust the relevant Channel levels. When an
input command completed, press the Up/Down keys can increase/decrease the
relevant channel levels. Adjustment upon channel levels can be available within
the permitted range.
For example, input the command “1 > 40” and give a press upon the “Down”
key , the relevant levels of Ch1~Ch40 will respectively decrease by one level.
When all the channels has been adjusted back to 0 level, the LCD will show :
Ch016>00 00 00 00 00
Ch021>00 00 00 00 00
Cmd : 1>40_
Act : All chan zero
While all the channels has been adjusted to their maximum levels, the LCD
will show :
Ch016>FL FL FL FL FL
Ch021>FL FL FL FL FL
Cmd : 1>40_
Act : All chan full
