background image

 

2

     

           

POCKET 

 

DMX

 

         

1

 

 

Introduction: 

 

   

     

 

Thank you for your purchase of our product 

POCKET DMX

 . 

   This product 

POCKET DMX

 is a pocket DMX controller with a built-in chargeable 

battery. The unit can realize the application of 512 channels output, and every channel 
level can be set availably. Each output scene can be recorded as a Cue( up to 120 Cues 
available ). These saved Cues can be operated singly, and also can they run orderly in 
groups according to their numbers of sequence. The duration of each channel level’s 
changing from the current level to the

 

pre-set level can be appointed within 0~99 seconds. 

The interval time between every two relevant Cues can be set within 1~99 seconds. 

2 Features: 

 

LCD in 4 lines 

×

 20 digits

 

 

Full DMX 512 Channels output

 

 

Numeric keypad with function key operation

 

 

Interactive command line input

 

 

Snap shot the incoming DMX signal to be Cue

 

3 Notice information: 

     

 Unpacking  

  This product has been thoroughly tested and carefully packed. Before operating, 
please make sure that the unit has not suffered any damage and all accessories are not 
missing. Should any damage have occurred, please do not use it and contact the local 
dealer immediately. 

   

Warning   

  Keep the unit dry, do not expose it to water or high levels of humid. 

  Do not try to dismantle or modify the product. 

  Turn off the power if not using this unit for a long time. 

  Any strong shocks or vibration may result in malfunction.   

  This unit must operated by adults, do not allow children to play with it.   

   

 

Copyright 

 

   

No part of this product can be reproduced, transmitted, or translated into any language     

in any form without authorized permission.   
 
 

 

Summary of Contents for POCKET DMX











Reviews: