Worcraft 114781, Instruction Manual

Page: 40 / 51

CORDLESS DRILL/DRIVER
INTENDED USE
This tool is intended for drilling in wood, metal, ceramic and plastic; tools with electronic speed control and left/right rotation are
also suitable for screwdriving and thread cutting.
TECHNICAL SPECIFICATIONS
Type / model: CD-S20LiW (CD18-20SL) Max. drill diameter in wood
Ø30mm
Voltage 20VDC Insulation class III
Rated speed 0-400/0-1400 rpm Applicable battery pack CLB-S20Li-2.0 / CLB-S20Li-2.0A
Torque settings 18+1 Sound pressure level LpA:71.3dB (A), K=5 dB (A)
Max. torque 40N.m Sound power level LwA: 82.3 dB (A), K=3 dB (A)
Chuck diameter
Ø0.8-10mm
Vibration ah=1,698m/s
2
,K=1.5m/s
2
Max. drilling diameter in
steel
Ø8mm
Weight (without battery pack) 1.0kg
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN62841
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention! Pull out mains plug immediately, if the mains cable
is damaged, entangled or severed. Always remove
the mains plug before working on the device.
Read the manual.
Wear ear protection.
Wear eye protection Wear breathing protection
Electrical appliances must not be
disposed of with the domestic waste. Protection class III
PRODUCT ELEMENTS (SEE FIG.2)
1 Switch 5 Torque sleeve
2 Forward / Reverse knob 6 Working LED light
3 Chuck 7 Belt hook
4 Low / High speed selector 8 Battery pack
SAFETY
General Power Tool Safety Warnings
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mainsoperated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
●
Keep work area clean and well lit. Cluttered or dark
areasinvite accidents.
●
Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases ordust. Power
tools create sparks which may ignite the dust or fumes.
●
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
Electrical safety
●
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
●
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.