Worcraft 114781, Instruction Manual

Page: 42 / 51

Torque select (Fig. 8)
1-6 torque settings: For small size screws.
7-12 torque setting: For miduim size screws.
13-18 torque settings: For big size screws.
Drill setting: For working on wood on steel board.
1 / 2 Speed select (Fig. 9)
1
st
speed select is lower speed for operation on hard materials,
such as drive small or medium screws in wood, drilling in steel
bard.
2
nd
speed select is higher speed for operation on bigger size
screws, or drill in soft materials as wood or something like that.
Battery Charging (Fig.10)
1. Plug the battery charging into the socket; The power
indicator light on green.
2. Slide the battery pack into the slot of battery chrger, after
hear a click, the battery pack was secured. The power
indicator light off, and meanwhile the charging indicator light
on red. The charging process starts.
3. For 2.0Ah battery, after around 50min to 1hour, the charging
indicator light will off, and meanwhile the power
indicator light green on again. It denotes the
charging process is completely finished.
4. Pull out the charger plug, and then pull off the
battery pack form charger.
Charging tips (Fig.11)
After using, the battery pack probably a little bit hot. In
that case, the battery pack can not be charged in.It
need to have a rest, let it cool down.
Battery volume indicator (fig. 12)
The battery pack has a feature to indicator which
volume status. To show this feature, just press the
button on the housing.
0 light on means the volume remains below 10%;
1 lights on means the volume remains 10% to 25%
2 lights on means the volume remains 25% to 50%
3 lights on means the volume remains 50% to 75%
4 lights on means the volume remains 75% to 100%
MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the motor. Regularly clean the machine
housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come off
use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents
may damage the plastic parts.
The machine requires no additional lubrication. If a fault occur, e.g. after wear of a part, please contact your local dealer
’s service.
ENVIRONMENT PROTECTION
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of the packaging
materials can be recycled. Take these materials to the appropriate recycling locations. Take your unwanted machines to your
local dealer. Here they will be disposed of in an environmentally safe way.
Li-ion batteries can be recycled. Deliver them to a disposal site for chemical waste so that they can be recycled or
disposed of in an environmentally friendly manner.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste! Please actively
support us in conserving resources and protecting the environment by returning this appliance to the collection
centres (if available).
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in conformity with the following standards or standardized
documents: EN62841-1:2015; EN62841-2-1:2018+A11:2019; EN55014-1:2021; EN55014-2:2021; in accordance with the
regulations 200
6/42/ЕС, 2014/30/ЕU.
NOISE/VIBRATION Measured in accordance with EN62841 the sound pressure level of this tool is 71.3dB(A) and the sound
power level is 82.3dB(A) (standard deviation: 3 dB), and the vibration is 1,698 m/s
2
(drilling mode).
Akku-Bohrschrauber
EINLEITUNG
Dieses Werkzeug ist bestimmt zum Bohren in Holz, Metall, Ziegel, Gestein, Keramik und Kunststoff; Werkzeuge mit
elektronischer Drehzahlregulierung und Rechts-/ Linkslauf sind auch geeignet zum Schrauben und Gewindeschneiden.
TECHNISCHE DATEN
Typ / Modell:CD-S20LiW (CD18-20SL) max. Bohrdurchmesser in Holz
Ø30mm
Stromspannung 20VDC Isolationsklasse III
Nenngeschwindigkeit 0-400/0-1400 rpm Anwendbarer Akku CLB-S20Li-2.0 / CLB-S20Li-2.0A
Drehmomenteinstellungen 18+1 Schalldruckpegel LpA:71.3dB (A), K=5 dB (A)
max. Drehmoment 40N.m Schallleistungspegel LwA: 82.3 dB (A), K=3 dB (A)
Futterdurchmesser
Ø0.8-10mm
Vibration ah=1,698m/s
2
,K=1.5m/s
2
max. Bohrdurchmesser in
Stahl
Ø8mm
Gewicht (ohne Akku) 1.0kg