Manual 37429
easYgen-2000 Series - Genset Control
Page 8/41
© Woodward
Chapter 2.
Basic Applications
Overview
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
NOTE
Please refer to the Configuration Manual 37427 for selection of the application mode. Depending on the
application, different application modes are possible.
•
Application mode {0} - [start/stop] - engine control - refer to page 9
-
Measuring of engine/generator parameters (i.e. voltage, frequency, current, power, coolant temperature, oil
pressure, etc.)
-
Engine start/stop
•
Application mode {1o} - [open GCB] - protection - refer to page 10
-
Measuring of engine/generator parameters (i.e. voltage, frequency, current, power, coolant temperature, oil
pressure, etc.)
-
Engine start/stop
-
Engine/generator protection (relay output to open GCB)
•
Application mode {1oc} - [open/close GCB] - 1-CB control - refer to page 11
-
Measuring of engine/generator parameters (i.e. voltage, frequency, current, power, coolant temperature, oil
pressure, etc.)
-
Engine start/stop
-
Engine/generator protection (relay output to open GCB)
-
GCB operation (relay output to close GCB)
•
Application mode {2oc} - [open/close GCB/MCB] - 2-CB control - refer to page 12
-
Measuring of engine/generator/mains parameters (i.e. voltage, frequency, current, power, coolant tempera-
ture, oil pressure, etc.)
-
Engine start/stop
-
Engine/generator protection (relay output to open GCB)
-
GCB operation (relay output to close GCB)
-
MCB operation (relay output to open and close the MCB)
-
Mains failure detection (AMF auto mains failure operation) and automatic engine start/stop