Woodhead SST-DN3-PCI-1 Hardware Reference Manual Download Page 59

Page: 59 / 67

Hardware Reference Guide

SST-DN3-PCI-1 and SST-DN3-PCI-2

Warranty and Support

Document Edition: 1.1, Document #: 715-0083, Template Edition: 1.1, Template #: QMS-06-045

Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.

D.1 Warranty

For warranty information pertaining to the card, refer to

http://www.mysst.com/warranty.asp

D.2 Reference Documents

•

DeviceNet Specification

, Volumes I and II, V2.0, Errata 5

•

ODVA Publication

, March 2002

http://www.odva.org/

•

PCI Local Bus Specification v2.2

PCI Special Interest Group, December 1998

•

PCI9030 Datasheet v1.4

PLX Technology Publications, May 2002

•

SST-DN3-PCI and 5136-DNP-PCI Comparison Technical Note

http://www.mysst.com/download

D.3 Technical Support

Please ensure that you have the following information readily available before calling for
technical support:

•

Card model, type and serial number

•

Computer’s make, model, CPU speed and hardware configuration (other cards installed)

•

Operating system type and version

•

Details of the problem you are experiencing: application module type and version, target
network, and circumstances that may have caused the problem

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for SST-DN3-PCI-1




































































Search results

Summary of Contents for SST-DN3-PCI-1

Reviews:

Related manuals for SST-DN3-PCI-1

Brands by name

Popular brands

Woodhead SST-DN3-PCI-1, Hardware Reference Manual

Search results

Summary of Contents for SST-DN3-PCI-1

Reviews:

Related manuals for SST-DN3-PCI-1

Brands by name

Popular brands