Woodhead SST-DN3-PCI-1 Hardware Reference Manual Download

Page: 17 / 67

Hardware Reference Guide

SST-DN3-PCI-1 and SST-DN3-PCI-2

Card

Overview

Document Edition: 1.1, Document #: 715-0083, Template Edition: 1.1, Template #: QMS-06-045

Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.

1.4 DN3 Compatibility Overview

For a comparison of DN3 with DNP, refer to Section D.2,

Reference Documents

The following table outlines the requirements of different PCI revisions and the PCI
requirements of the card.

Table 1: PCI Compatibility Table

PCI

Specification

Revision

Supply Voltage Provided by

Motherboard

PCI I/O Signaling Voltage Level of

Motherboard

3.3V

2.1

Optional Required

Not

supported

Supported

2.2 Required

Required

Supported

2.3 Required

Required

Supported

Not

supported

SST Product

SST-DN3-PCI-1

and

SST-DN3-PCI-2

Required Required

Supported

The card requires both 3.3V and 5V to be supplied by the motherboard. Because 3.3V

supply voltage is optional in PCI specification revision 2.1, the card may not function in
some PCI 2.1-compliant motherboards.

The card will auto-detect the motherboard PCI I/O signaling level and adjust its signaling level

accordingly, allowing it to function in PCI systems that support either 5V or 3.3V I/O signaling
levels.

Summary

The card’s compatibility can be summarized as follows:

•

It will operate in PCI v2.2- and v2.3-compliant systems

•

It will also operate in PCI 2.1-compliant systems that have implemented the optional
3.3V supply voltage

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for SST-DN3-PCI-1




































































Search results

Summary of Contents for SST-DN3-PCI-1

Reviews:

Related manuals for SST-DN3-PCI-1

Brands by name

Popular brands

Woodhead SST-DN3-PCI-1, Hardware Reference Manual

Search results

Summary of Contents for SST-DN3-PCI-1

Reviews:

Related manuals for SST-DN3-PCI-1

Brands by name

Popular brands