Woodhead SST-DN3-PCI-1 Hardware Reference Manual Download Page 60 | Manualshive

Page: 60 / 67

background image

SST-DN3-PCI-1 and SST-DN3-PCI-2

Hardware Reference Guide

Warranty and Support

59

©2004 Woodhead Software & Electronics, Division of Woodhead Canada Limited

Document Edition: 1.1, Document #: 715-0083, Template Edition: 1.1, Template #: QMS-06-045

Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.

D.3.1 Getting Help

Technical support is available during regular business hours by telephone, fax or email from any
Woodhead Software & Electronics office, or from

http://www.woodhead.com/

. Documentation

and software updates are also available on the website.

Note

If you are using the card with a third-party application, refer to the
documentation for that package for information on configuring the
software for the card.

North America

Canada:
Tel: 1-519-725-5136
Fax: 1-519-725-1515
Email:

[email protected]

Europe

France:
Tel: 33-(0)2-32-96-04-22
Fax: 33-(0)2-32-96-04-21
Email:

[email protected]

Germany:
Tel: 49-711-782-374-22
Fax: 49-711-782-374-11
Email:

[email protected]

Italy:
Tel: 39-01-059-540-52
Fax: 39-0-10-59-56-925
Email:

[email protected]

United Kingdom:
Tel: 33-(0)2-32-96-04-23
Fax: 44-161-285-8686
Email:

[email protected]

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
58
59
60
61
62
...
»

Summary of Contents for SST-DN3-PCI-1




































































Reviews:

No comments

Related manuals for SST-DN3-PCI-1

Brand: Raymarine Pages: 46

Brand: Datapath Pages: 2

8-out Video/Sync Output Cards VM2144VS

Brand: Altinex Pages: 13

AEC-67160M Ultra160

Brand: Acard Pages: 25

Brand: Access security product Pages: 10

Brand: Atheros Pages: 53

Brand: DAT Pages: 3

Brand: Nvidia Pages: 5

Brand: SMC Networks Pages: 44

Brand: G4S Pages: 2

Brand: Farpointe Data Pages: 2

2126800 - Media Reader 7500

Brand: Adaptec Pages: 20

Brand: Broadcom Pages: 15

Brand: Broadcom Pages: 16

Brand: CDVI Pages: 16

Brand: CDVI Pages: 20

Brand: AuthenTrend Pages: 33

Brand: ADLINK Technology Pages: 127

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands