Dual Burner Phoenix Installation
and Operation Manual
PG
16
OF
32
M0030.10 JANUARY 2020
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TEL
+1.360.650.1111
FAX
+1.360.650.1166
woodstone-corp.com
ASSEMBLY
Follow these instructions only if the oven was shipped disassembled, or disassembled to move through a narrow door
or passageway.
The oven must be installed on a flat level surface. The weight of the oven is carried by the full perimeter of the oven stand. If it is
necessary to shim the oven for leveling purposes, it is critical that the shim material be metal, and that the shims are installed in
such a way that the full perimeter of the stand is solidly supported. Any gaps created by shimming between the oven and the floor
must be sealed for proper ventilation.
Failure to solidly support the full perimeter of the oven stand can result in costly
damage to the oven and will void the warranty.
The floor design and construction must be adequate to handle the weight of the oven.
Please see
woodstone-corp.com
for floor loading information.
2.
Use the 9.5 mm x 25 mm (3/8" x 1") carriage
bolts to assemble the stand. Be sure to use the
washers provided and to tighten nuts and bolts
securely.
1.
Lay out pieces.
Carriage bolts
9.5 x 25mm (3/8 x 1")
3030 only:
9.5 x 19mm (3/8 x 3/4")