Wood-mizer TVSE11S - SC, User Manual

Page: 84 / 120

ALIGNMENT
Complete Alignment Procedure
6
6-12 MHdoc031116
6.2 Complete Alignment Procedure
Perform all steps in this section to completely realign or align the resaw after the first setup.
6.2.1 Blade Wheels Alignment
The blade wheels should be adjusted so they are level in the vertical and horizontal planes. If the
blade wheels are tilted vertically, the blade will want to move in the tilted direction. If the blade wheels
are tilted horizontally, the blade will not track properly on the wheels. The blade guide rollers should
not touch and deflect the blade when the blade wheels are adjusted.
1. Set the saw heads distance to 100mm (3.94”). See Section 2.8 .
2. Attach the blade wheels alignment tool
1
to the lower blade wheels as shown in the figure below.
See Figure 6-14.
1. The service tool can be ordered in Wood-Mizer (
P
art.
N
o. 099330) or you can make it yourself according to
figure 6-15.
FIG. 6-14
Alignment
Tool Pins