Wood-mizer TVSE11S - SC, User Manual

Page: 54 / 120

MAINTENANCE
Blade Guides
5
5-2 25doc031116 MAINTENANCE
5.2 Blade Guides
1. Check the rollers for performance and wear every blade change. Make sure the rollers are clean and
spinning freely. If not, rebuild them. Replace any rollers which have worn smooth or have become
cone shaped. See the Parts manual for blade guide rebuild kits and complete roller assemblies.
5.3 Sawdust Removal
1. Remove the excess sawdust from the blade wheel housing, the sawdust chute and the lower rollers
of the saw heads every blade change.
See Figure 5-1.
CAUTION! Never use grease on the lower rollers of the saw heads as
it will collect sawdust.
2. Remove the excess sawdust and slabs from the infeed and outfeed tables, the log deck and the
cross transfer deck.
FIG. 5-2