Wood-mizer TVSE11S - SC, User Manual

Page: 29 / 120

OPERATION
Blade Guide Arm Adjustment
Operation MHdoc031116 2-12
2
CAUTION! Make sure all guards and covers are in place and secured
before operating or towing the machine. Failure to do so may result in
serious injury. Be sure the blade housing cover is in place and
secured.
NOTE: After aligning the blade on the wheels, always check the blade
guide spacing and location.
2.7 Blade Guide Arm Adjustment
The blade guide arms can be adjusted up or down depending on the height of the material to be cut.
The arms should be adjusted about 25 mm (1”) above than the material to be cut.
See Figure 2-5. To move the blade guide arm, unlock the safety pin and slide the arm up or down.
Lock the lock pin.
FIG. 2-5
tvs_248
Blade Guide Arm
Lock Pin