Wood-mizer TVSE11S - SC, User Manual

Page: 78 / 120

ALIGNMENT
Blade Wheel Alignment
6
6-6 MHdoc031116
See Figure 6-6.
5. Measure the distance from the edge of the LTBGAT tool to the rope. The distances marked A, B, C
and D must be equal. If the measurements are different, correct this using the drive-side blade wheel
adjustment bolts.
IMPORTANT! Before adjusting the drive-side wheel, loosen the drive
belt. ( See Section 5.6 .)
See Figure 6-7.
FIG. 6-6
FIG. 6-7
tvs_198_A
Top surface edges of
chain guide aligned
with ropes on the
whole length
!
A B
C
LTBGAT
D
A=B=C=D
Blade
Rope