Wood-mizer TVSE11S - SC, User Manual

Page: 30 / 120

OPERATION
Machine Start
2
2-13 MHdoc031116 Operation
2.8 Machine Start
DANGER! Before starting the machine, perform these steps to avoid
injury and/or damage to the equipment:

Close the blade housing covers and replace any guards removed for service.

Check the feed track and remove all loose objects such as tools, wood, etc.

Check that the blades are properly tensioned.

Make sure all persons are at a safe distance from the machine.

Check that the emergency stops are released.

Turn on dust extraction system
NOTE: The machine will not start if either of the emergency stops is
on.
CAUTION! If the blade breaks during machine operation, push the
emergency stop button to stop the blade motor and wait at least
10 seconds before you open the blade housing cover.
Before starting the saw heads, check that the main power switch servicing the machine is on.
See Figure 2-6. Start the blade motors. To do this, turn the key switch to the position and then
push the Blade START button on the control panel (see the figure below). The motors should start
and the blades should start spinning.