Wood-mizer SlabMizer MB200, Operation Manual

Page: 29 / 55

Planer Assembly
Install the Gantry
3
3-8 WMdoc082019 Planer Assembly
3.8 Install the Gantry
WARNING! Use a fork lift, crane, or other lifting device to remove the
gantry from the packing crate. Failure to follow this may result in seri-
ous injury or death.
IMPORTANT! Do not attempt to set the gantry down on any surface
other than the bed rails. Equipment damage may occur.
1. Place the Gantry onto the assembled bed section. Use care when mounting the gantry to
avoid damage.
3.9 Install the Head
Retainers
2. With the Gantry in place, secure
it to the bed assembly by install-
ing the Head Retainers (4) on
each side of the table.
3. Secure the Head Retainers
using (1) 1/2” nut. Repeat these
steps for all (4) Head Retainers
Head Retainer
(4Qty)