Preparing the sharpener for sharpening VORTEX blades
Cam Replacement
Preparing the sharpener for sharpening VORTEX bladesISHdoc121319
4-5
4
2.
Unscrew the three screws shown below (B) and remove the stroke adjustment plate (A).
3.
Dismount the cam (A) by removing the two bolts shown below (B). Next, remove the magnet (C) from
the cam and fasten it to the new cam (Part No. 509734-1 Rev. B). Install the new cam with the
magnet.
FIG. 4-9
FIG. 4-10
