Safety & General Information
1
1-1
BMS500/600doc121319
Safety & General Information
SECTION 1 SAFETY & GENERAL INFORMATION
This symbol calls your attention to instructions concerning your personal safety. Be sure to observe
and
follow
these
instructions.
This
symbol
accompanies
a
signal
word.
The word
DANGER
indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
suggests a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
refers to potentially hazardous situations which,
if not avoided, may result in minor or moderate injury to persons or equipment. Read all safety
instructions before operating this equipment and observe all safety warnings!
Warning stripes are placed on areas where a single decal would be insufficient. To avoid serious
injury, keep out of the path of any equipment marked with warning stripes.
Read and observe all safety instructions before operating the sharpener! Also read any additional
manufacturer’s manuals and observe any applicable safety instructions including dangers, warnings,
and cautions.
Always be sure that all safety decals are clean and readable. Replace all damaged safety decals to
prevent personal injury or damage to the equipment. Contact your local distributor, or call your
Customer Service Representative to order more decals.
Always properly dispose of all by-products, including debris, coolant and oil.
Safety instructions are listed in this section by the following operations:
Electrical Safety
Blade Handling
Machine Operation
