Safety & General Information
Control Panel Components
1
1-7
BMS500/600doc121319
Safety & General Information
1.9
Control Panel Components
See Figure 1-3.
The control panel components and their descriptions are given below.
Emergency Stop Button
Shuts off all sharpener operations.
Press this button to shut off all machine operations.
NOTE
: After being activated,
the emergency stop button must be reset before the sharpener can be operated again.
To reset, rotate the button counterclockwise and release.
Feed Rate Dial
Controls cam rotational speed, i.e. number of sharpened teeth per minute.
Rotate the dial as necessary to increase or decrease the cam speed.
Cam Motor Start/Stop Switch
Press "START" on the Cam Motor Start/Stop Switch to start the cam and index arm motor.
FIG. 1-3
IS
2
03
_
00
3
b
START
STOP
START
STOP
START
STOP
Emergency Stop
Button
Feed Rate Dial
Cam Motor Start/Stop
Switch
Grinder Motor Start/Stop
Switch
Oil Flow Start/Stop
Switch
Tooth Counter
Reset Button
Sharpening Cycle
Start Button
Teeth Number, Cycle
Number Setting
Buttons
Cycle Number
Setting Button
Diagnostic
Button
