SETUP & OPERATION
3" Blade Support Setup (Option)
SETUP & OPERATION
BMS500/600doc121319
2-14
2
2.
Position the blade supports on the right and left side of the sharpener. Using the connector (1),
connect the blade support equipped with three rollers with the sharpener.
See Figure 2-11.
3.
Position the blade support kits so that the blade is not too loose and moves freely during the
sharpening operation.
4.
The blade supports should be adjusted vertically so that the bottom of the blade is at the same height
along entire length of the blade.
FIG. 2-11
is203_039
1
A
A
1
