08
MULTI FUNCTIONAL CCTV TESTER
Precautions
Battery Charging Precautions
The Rapport
III
has a built-in Lithium Polymer Battery.
It can be recharged using a DC12V power adapter with
an output of 1.2A or above and reaches its full charge
after a period in excess of 6 hours. After the battery
has been fully charged for the first 2~3 charging cycles,
it can be used for approximately 6 hours.(Max.8 hrs)
(In normal operation)
The battery can be recharged by connecting it to the
DC adapter, regardless of OSD power, when the slider
switch has been turned on.
The discharge operation starts when the Main Switch is turned on and it then
consumes power from the battery. Therefore, when the Rapport
III
is not
being used for a period of time, make sure the Main Switch is turned off.
Precautions
Battery Handling
Do not charge the battery in ambient temperatures above 40ºC/104ºF
Never short circuit the positive and negative poles of the battery.
Do not disassemble; the battery is not a serviceable item.
Keep away from static electronic fields while using, charging or
when storing.
Stop charging immediately if the battery is overheating, emitting
a burning smell, changed in colour or distorted.
Only use the supplied battery charger or one with a safety guarantee.
Do not immerse the battery in water.
Avoid mechanical shocks to the battery.
Do not bend the tabs are these are breakable.
Do not open the folded edges.
The sealed edge adjacent to the battery contacts is a very sensitive
area; take care not to bend or fold the edges.
The soft packaging can easily be damaged by contact with sharp
surfaces or objects, take care when handling or storing.
Avoid short circuits, as this will cause internal damage to the battery.
09
MULTI FUNCTIONAL CCTV TESTER
SAFETY INFORMATION
SAFETY INFORMATION
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
