3
3. Panel Description
①
POWER LED:
The LED illuminates green when power is applied.
②
In LED:
The LED indicates blue when the encoder detects HDMI source input.
③
Out LED:
The LED indicates blue when the HDMI Out port is connected to display
device.
④
Link LED:
The LED illuminates blue when there is a valid LAN link between the
encoder and the decoder.
⑤
HDMI In:
Type-A female HDMI port to connect HDMI video source device.
⑥
HDMI Out:
Type-A female HDMI port to connect HDMI display device.
⑦
RS232:
3-pin terminal block for RS232 routing control. Supports point to point
unicast and point to multipoint broadcast configuration.
⑧
IR IN:
3.5mm jack to connect an IR receiver for IR routing control.
⑨
IR OUT:
3.5mm jack to connect an IR emitter for IR routing control.
⑩
LAN (PoE):
RJ45 port to connect directly to the decoder or a network switch using
a CATx cable.
⑪
DC 12V:
DC port for AC power adapter connection.
IP Streaming Encoder and Decoder
3.1 WolfPack HDTVIPH400E Encoder
