16
5.4 Audio Routing Tab
The "Audio Switching" tab is used to setup and manage audio routing between TX and
RX devices.
All the RX devices are listed in the top half of the Decoder (RX) section. Similarly, all
the TX devices are listed in the bottom half in the Encoder (TX) section.
First, verify if appropriate TX and RX devices are joined:
1) Verify, if the Decoder (RX) is currently joined with the desired Encoder (TX).
a) Click on the RX and the Encoder (TX) it is joined to will be highlighted blue.
b) Selecting the respective encoder will highlight all the decoders joined to the
same TX.
2) If the respective Encoder (TX) is currently not joined to the Decoder (RX), join them
together:
a) In the Encoder (TX) section, select a TX by left-clicking on its associated active
tile.
b) Drag and drop the TX tile over the RX tile it is to be joined with.
c) TX and RX are now joined together.
d) Repeat above steps if additional decoders are to be joined to the same TX.
IP Streaming Encoder and Decoder
