19
5.6 IR Routing Tab
The "IR Routing" tab is used to setup and manage IR data distribution for devices.
There are two sections provided in the IP Streaming Management interface, "Encoders
(TX)" and "Decoders (RX)". Each device discovered on the network is listed in both
groups, because each can both send and receive IR data.
1) Select the "IR Routing" tab in the IP Streaming Management interface.
2) Verify, which Encoders and Decoders are joined together. Left-click on the device
tile you want to see the connection status of. All joined together tiles will be
highlighted blue.
3) To pair devices, drag the tile representing the Encoder (TX) and drop it over the
desired Decoder (RX) to create one-way communication.
4) To create a bi-directional IR path between two devices, two separate pairings are
required. Repeat the step above, but in reverse (drop TX on RX) to create the
second pairing.
IP Streaming Encoder and Decoder
