9
Upon launch, the IP Streaming Management
’s main interface will appear as shown in
the picture below:
After connecting to the LAN, the IP Streaming Management will show discovered
devices as tiles. There are few things to take note of:
The application features many different tabs to control the HDMI routing, as well as
routing of other signals such as analog audio, RS232 control, etc. The default
current tab should be "Video Switching", meaning that the video source displayed
by an RX device (Decoder).
The top area of the user interface is labeled "Decoder (RX)". All RX devices
detected on the network will appear here.
The bottom area of the user interface is labeled “Encoder (TX)". All TX devices
detected on the network will appear here.
IP Streaming Encoder and Decoder
HDTVIPH400D
HDTVIPH400E
