11
5.2 Device Configuration
Before starting the IP Streaming Management application, make sure it is connected
directly to the network switch on one of the devices (TX or RX). Now launch the
application. Upon launch, the IP Streaming Management main window will open up in
the “Video Switching” tab. It will discover all the TX and RX devices on the network and
display them inside the application.
All connected devices on the network will appear as a gray tiles within the application
window.
Each tile will identify the “Hostname” of the device. The default device “Hostname” is
the IPH400E/IPH400D
. Note that the “Hostname” can be updated at any time. The “IP
Address” of the device is also indicated within the tile.
If a source device is connected to the video port of the TX, a picture illustrating a
source device will appear within the respective tile along with information about the
video feed. Similarly, if a display device is connected to the RX, an illustration of a
display will appear within the corresponding RX tile. If no device is visible within the tile,
it means that the device is connected and detected but no source (or display) device is
connected to the TX (RX).
TX device tile info
RX device tile info
IP Streaming Encoder and Decoder
