WOLFF EF 135, Translation Of The Original Instructions

Page: 16 / 36

16
Restriction of use
Akku Screed grooving machine EF135 18V is designed
exclusively for jointing cutting in screed, without the use
of water and in conjunction with a vacuum cleaner of dust
class M,designed.
When the machine is used in another way, it shall be
regarded as unfi t for the purpose.
Uzin Utz Tools GmbH & Co.KG shall not accept any
liability for damage resulting from non-intended use.
Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards of standard-
ization documents:
DIN EN 1037, EN ISO 12100, DIN EN 62841-1,
DIN EN 62841-2-5,
DIN EN 55014-1, DIN EN 55014-2
according to the provisions of the:
2006/42/EC, 2014/30/EU, 2014/35/EU.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the gathering
of the technical documentation.
22.01.2020 i.V.
Uzin Utz Tools GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1
Technical data
Power supply Charger................................120V / 230 V AC
Frequency ..................................................................50 Hz
Battery voltage..............................................................18 V
Battery capacity.............................................................5 Ah
Maximum speed................................................8.500 r.p.m.
Weight with Akku......................................................4,55 kg
Max. grooving depth.............................................0 - 35 mm
Cutting blade.............................Diamond Ø135 mm x 2mm
Scope of delivery:
1 Akku Screed grooving machine EF135 18V
2 batteries 18V / 5Ah
1 charger 230V/50Hz
1 two-hole spanner
1 adapter for suction cup
1 hearing protection
1 safety goggles
1 diamond saw blade
1 transport case
1 instruction manual
2.0 Safety Warnings
2.1 General Power Tool Safety Warnings
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and instructions may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
2.2.1 Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive at-
mos-pheres, such as in the presence of fl ammable
liquids, gases or dust.
Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while opera-
ting a power tool.
Distractions can cause you to lose control.
2.1.2 Electrical safety
a) Power tool plugs must match the outlet. Never mo-
dify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrige
rators.
There is an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Warning
EN