Sealed Burner Rangetop Installation
IMPORTANT NOTE:
This installation must be completed
by a qualified installer, service agency or gas supplier.
Read this entire installation guide prior to installation and
save for the local inspector’s reference. The homeowner
should keep this installation guide for future reference.
This appliance must be installed in accordance with
National Electrical Codes, as well as all state, municipal
and local codes. The correct voltage, frequency and
amperage must be supplied to the appliance from a dedi-
cated, grounded circuit which is protected by a properly
sized circuit breaker or time delay fuse. The proper
voltage, frequency and amperage ratings are listed on
the product rating plate.
Wolf sealed burner rangetops are manufactured for use
with natural gas or LP gas. Check the product rating plate
for the type of gas for your specific model. If this appli-
ance does not correspond to your type of gas, contact
your authorized Wolf dealer.
Record the model and serial numbers before installing the
sealed burner rangetop. Both numbers are listed on the
product rating plate, located on the bottom of the control
panel assembly, at the far right. Refer to the illustration
below.
Wolf Sealed Burner Rangetops
3
wolfappliance.com/specs
Wolf Sealed Burner Rangetop
Model Number
Serial Number
Location of rating plate.
RATING PLATE
