Sealed Burner Rangetop Specifications
6
Installation Requirements
IMPORTANT NOTE:
Caution must be used in planning the
proper installation of the Wolf sealed burner rangetop to
avoid fires or damage to adjacent cabinetry or kitchen
equipment. Follow all minimum clearances to combustible
surfaces shown in the installation illustration for your
specific model on the following pages.
IMPORTANT NOTE:
When installing against a combustible
surface, a minimum 5"
(127)
riser is required for model
SRT366, and a minimum 10"
(254)
riser is required for
36"
(914)
and 48"
(1219)
sealed burner rangetops with a
charbroiler or griddle.
Risers and other accessories are available through your
authorized Wolf dealer. For local dealer information,
visit the find a showroom section of our website,
wolfappliance.com.
Failure to locate the rangetop without the proper clear-
ances will result in a fire hazard.
VENTILATION
The sealed burner rangetop must have an adequate
supply of fresh air to assure proper combustion and venti-
lation. The location of the rangetop should be away from
strong draft areas, such as windows, doors and strong
heating vents or fans. Do not obstruct the flow of air.
Due to the high volume of ventilation air required, a source
of outside replacement air is recommended. This is espe-
cially important for tightly sealed and insulated homes. A
qualified HVAC contractor should be consulted.
It is recommended that you use a Wolf pro ventilation
hood or hood liner with the sealed burner rangetop. If the
rangetop is to be installed without ventilation, a 36"
(914)
minimum clearance, 44"
(1118)
for charbroiler, from
countertop to combustible materials above the rangetop
is required. Refer to the installation illustrations on
pages 10–12.
A downdraft ventilation system can be used with models
SRT304 and SRT366. An accessory trim kit is necessary
for this installation. Contact your authorized Wolf dealer
for details.