background image

Hearth & Home Technologies • Fireside Burner/Hearth Kits • 4004-304 Rev C • 08/2010

1

TM

Models:

MHK18NG

MHK24NG

STMHK18NG

STMHK24NG

Fireside Burner/Hearth Kits

For Natural Gas Use Only

Installation

 Instructions

Check with your local building code agency before you begin installation to ensure compliance with local codes, including 

the need for permits and follow-up inspections. If you encounter any problems regarding code approvals, or if you need 

clarification of any of the instructions contained here, contact the Technical Services Dept., Hearth & Home Technologies 

Inc., phone 1-888-427-3973 or 1-800-927-6841.

Note: 

An arrow (

) found in the text signifies change in 

content.

DO NOT DISCARD THIS MANUAL

CAUTION

•  Important  operating 

a n d   m a i n t e n a n c e 

instructions included.

• 

Leave this manual with 

party  responsible  for 

use and operation.

• 

Read,  understand 

and  follow  these 

instructions  for  safe 

i n s t a l l a t i o n   a n d 

operation.

DO

NO

T

DIS

CA

RD

If the information in these instruc-

tions is not followed exactly, a 

fire may result causing property 

damage, personal injury, or death.

 

•  Do not store or use gasoline or other flam-

mable vapors and liquids in the vicinity of 

this or any other appliance.

•  What to do if you smell gas:

-  Do not try to light any appliance.

-  Do not touch any electrical switch. Do not 

use any phone in your building.

-  Immediately call your gas supplier from 

a  neighbor’s  phone.  Follow  the  gas 

supplier’s instructions.

-  If you cannot reach your gas supplier, call 

the fire department.

•  Installation and service must be performed 

by a qualified installer, service agency, or 

the gas supplier.

WARNING

HOT! DO NOT TOUCH

SEVERE BURNS MAY RESULT.

CLOTHING IGNITION MAY RESULT.

WARNING

•  Keep children away.  

•  CAREFULLY SUPERVISE children in same room as 

appliance.

•  Alert  children  and  adults  to  hazards  of  high 

temperatures.

•  Keep  clothing,  furniture,  draperies  and  other 

combustibles away. 

Glass  and  other  surfaces  are  hot  during 

operation and cool down.

Installation  and  service  of  this 

appliance should be performed by 

qualified personnel. Hearth & Home 

Technologies suggests NFI certified 

or factory-trained professionals, or 

technicians  super-

vised  by  an  NFI 

certified  profes-

sional.

In the Commonwealth of Massachusetts:

•  This appliance must be installed by a licensed plumber 

or gas fitter.

•  The chimney flue damper, when used with gas logs, will 

be welded open or completely removed.

•  A CO detector shall be installed in the room where the 

appliance is installed.

Summary of Contents for MHK18NG





















Reviews: