Wolf SO30F/S, Design Manual

Page: 98 / 120

Wolf Cooktop Ventilation
98
Planning Information
Wolf cooktop low-profile hoods are recommended for
use with Wolf induction, electric and gas cooktops and
integrated modules. These hoods have a telescopic flue
that allows you to reach a ceiling height of 8'
(2.4 m)
to
9'
(2.7 m)
with a finished look.
Low-profile wall and island hoods are available with an
internal blower. Wall hood models CTEWH36 and
CTEWH45 will require an in-line or remote blower
assembly, available through your authorized Wolf dealer.
For local dealer information, visit the find a showroom
section of our website, wolfappliance.com.
The blower will vary in size and is dictated by the cooking
unit, the volume of air that needs to be moved and the
length of the duct run. Refer to ventilation recommenda-
tions on pages 113–115. These hoods have an 6"
(152)
round duct with vertical discharge.
Cooktop low-profile hoods with an internal blower can be
used in a non-ducted application with a recirculating filter.
In this installation, kitchen air is purified through filters and
returned as clean air into the room. A recirculation kit
available through your authorized Wolf dealer is required.
Consult a qualified HVAC professional for specific installa-
tion and ducting applications.
ELECTRICAL REQUIREMENTS
Electrical Requirements
VENTILATION HOOD
Electrical Supply Grounded, 110/120 V AC, 60 Hz
Service 15 amp dedicated circuit