Wolf SO30F/S, Design Manual

Page: 33 / 120

ELECTRICAL REQUIREMENTS
Wolf Warming Drawers
33
wolfappliance.com/specs
Planning Information
The warming drawer must be installed with a Wolf
L series, E series or integrated drawer front, available
through your authorized Wolf dealer. For local dealer infor-
mation, visit the find a showroom section of our website,
wolfappliance.com. Specific installation instructions are
included with the drawer front.
For all installations, the warming drawer must be fully
enclosed, top and bottom.
The warming drawer platform must be able to support
200 lbs
(91 kg)
. The platform must be a minimum of 1"
(25)
above the toe kick to allow for the warming drawer trim
which overlaps
5
/
8
"
(16)
on all four sides.
The warming drawer with E series drawer front can be
installed in a standard, recessed or flush inset application.
For a standard installation, the drawer collar and front
panel sit proud of the cabinet face frame. A recessed
installation requires the cabinetry be recessed by
3
/
16
"
(5)
so the collar is flush with the cabinet face frame but the
drawer front will sit proud. A flush inset installation
requires the drawer collar and front panel be recessed to
be flush with surrounding cabinetry. Refer to illustrations
on the following pages for minimum cabinet dimensions
for your specific installation.
Electrical Requirements
WARMING DRAWER
Electrical Supply 120 V AC, 50/60 Hz
Service 15 or 20 amp dedicated circuit
Receptacle 3-prong grounding-type