3063527_201308
12
Control level 1
i
1
Operating mode
2
Current program
3
Extract air temp
4
Set room heating
5
Outside temperature
6
Actual vent air
temperature
Zone 1
Back
Operating mode
Ex. air temp.
Set room htg.
Outside temp
Act. vent air t
Curr program
Temperature selection key
Please note:
Pressing the key enables quick correction of the set room
temperature (or the supply/extract air temperature). You can turn
the r.h. rotary selector to raise or lower the required temperature
by up to 4 K. The bar on the display moves to the left or the right
depending on the direction the selector is turned. Press the r.h.
rotary selector to confirm the modified value.
Zone 1
Temperature
selection
0.0 K
0
Speed adjustment key
Please note:
Pressing the key displays the current speed. You can then turn the
r.h. rotary selector to modify the speed to a value between 30 and
100 %. Press the r.h. rotary selector to confirm the modified value.
The speed preselected here (the base speed) cannot be reduced
by the CO
2
sensor.
Zone 1
Speed adjust
30.0 %
Info key
Please note: In the case of more than one zone (up to 7), first
select the zone for which the values are to be scanned.
You can use the Info key to display current temperatures and system
values. Turning the r.h. rotary selector displays the following values.
Fire alarm
Fault zone
Frost protection room
External ON/OFF
Filter check
Standby
Summer ventilation
VA min limit heating
Night ventilation
Room temperature reached
Outside temperature shutdn
Control operation
