3063527_201308
10
Program selection
You can select the programs listed below by turning the l.h. rotary
selector.
The arrow on the l.h. edge of the display points to the selected
program.
R.h. rotary selector
The right hand rotary selector is used for all programming steps.
Turning the rotary selector enables you to select the required
menu item.
Pressing the r.h. rotary selector confirms the programming step.
L.h. rotary selector, program selection
This rotary selector enables the program to be selected. The rotary
selector can be rotated indefinitely, without an end stop. You will
feel it click into each position as it rotates. The selected function
is indicated by an arrow in the display.
Control level 1
Automatic mode
Ventilation according to a time switch program. Call-up of HR,
reheater and fan according to demand.
As shown in the diagram, you can preselect the operating mode
via the time program when the system has been switched off.
06:00
22:00
On
Off
„Day mode”
Time
Setback mode program
Selection:
- Economy operation
- Backup mode (factory setting)
- Standby
- Summer ventilation
Backup mode
Backup mode
07:00
14:00
