Wohler AMP1-S8DA, User Manual

Page: 60 / 76

8 21 03 0 : A MP x-S 8 S e r ie s U se r G u id e
© 2 01 3 Woh le r Te ch no lo g ie s, Inc . A ll ri g ht s re s e r v ed .
48
C h a p t e r 5 Se t u p M e n u
Sa v i n g a P r es e t
Creating a New Preset
1. Press either the
Up
or
Down
buttons to choose any preset labelled
Unused
Unused Unused
Unused
.
Figure 5–4 Choose an Unused Preset
2. Press the Enter button to display a prompt for a new preset name
as shown in Figure 5–5 .
Figure 5–5 Assigning the Name of a Preset
3. Scroll through letters (and symbols) using the
Left Up
and
Left
Down
buttons. Press the
Enter
button to accept the current letter
shown in the display and move to the next letter. Repeat this
procedure until the display shows the name you want to use for
this preset.
Figure 5–6 Completed Preset Name Selection
Note: To cancel the procedure at any time during this process,
press the
Escape
button and the preset will not be saved
and the unit will return to normal operation.
Choose PresetNum
Preset7: Unused
AES 1 ?@<A>BC
Name: A_
Note: Pressing the
Enter
button may display multiple letters,
but the only one that changes will be the one
immediately to the left of the underscore. As a result, it
may be necessary to start the procedure over again if
too many characters appear in the display.
HD.SDI1 _DONE_
Name: HDSDI1
→
_
USO
RESTRITO