Wohler AMP1-S8DA, User Manual

Page: 36 / 76

8 21 03 0 : A MP x-S 8 S e r ie s U se r G u id e
© 2 01 3 Woh le r Te ch no lo g ie s, Inc . A ll ri g ht s re s e r v ed .
24
C h a p t e r 3 A u d i o C o n fi g u r a t i o n
A n a l o g O u t p u t P r ef e r e n ce
Analog Output Preference
The Analog Output Preference determines how the
Selected/
Downmix Analog Output
connectors and the
Metered Analog
Output
connector output the metered signals when either the DM1,
DM2, or DM3 downmix options are selected. Refer to Rear Panel
Connectors on page 13 .
The default setting is Downmix Downmix Downmix Downmix , which outputs the speaker assign with
individual channel scaling (gain settings) intact as determined by the
selected downmix. However, if you select
Discrete Discrete Discrete Discrete , then all channels
with the downmix are output from these connectors at unity gain
without scaling of the channels as determined by the selected downmix.
To change the analog output settings:
1. Hold the
Fn
button while pressing the
Setup
button.
2. Press the
Down
button until the LCD screens AOutPref AOutPref AOutPref AOutPref as shown
in Figure 3–1 below.
Figure 3–1 Analog Output Preference LCD screen
3. Pressing the
Enter
button displays either Figure 3–2 or Figure 3–3
depending on the current setting.
Figure 3–2 Analog Output Preference Setting -
Discrete
Figure 3–3 Analog Output Preference Setting -
Downmix
848131 3.03
Setup: AOut Pref
-- Setup --
Aout Pref: Discr
-- Setup --
Aout Pref: D-mix
USO
RESTRITO