Page
38
Table 4–2: Meter Timings
Ballistics
Rise
Fall
Level Change
Time
VU Not
Specified
IEC Type I
5 ms to reach -2
dB of settled
reading
-20 dB
1.7 sec.
IEC Type II
10 ms to reach -2
dB of settled
reading
-24 dB
2.8 sec
None
Bar or Floating Segment Not Displayed
3.
Bar: Pressing this button and then rotating the Trim knob steps through the
available settings for the bar ballistics. Refer to Table 4–1.
4.
Reference: Pressing this button and then rotating the Trim knob adjusts the
reference. Refer to Table 4–1 for the reference standards for each scale.
Note: The AES scale does not allow you to set a reference.
