Page
15
Copying a Configuration File from the AMP1-16-M
1.
To copy a configuration file from the AMP1-16-M to the flash drive, press
Save
from the
Flash Drive Options
screen. The
Save to Flash
Drive
screen
will display as shown in
Figure 2–7
.
The lighter color
buttons indicate file
numbers that already contain configuration data.
Figure 2–7: Save to Flash Drive Screen
2.
Press the file number (
File 1
through
File 7
) of the file you want to copy
from your flash drive. When the copy process completes, the
Flash Drive
Options
screen re-displays.
3.
Remove the flash drive from the USB port.
Update Menu
This button only appears if the inserted flash drive contains a software update files.
Press this button to proceed to the software updating menu. Appendix D describes
in detail the procedure to update the AMP1-16-M software from a flash drive.
You can copy the software update files to a flash drive using the Wohler AMP1-16-M
Manager program in your PC. Refer to The USB Tab in Chapter 3 for adding a
software update to a flash drive.
If you prefer to update the AMP1-16-M software using a direct Ethernet connection
to a PC, refer to Appendix B for step by step instructions.
To update the AMP1-16-M software remotely using an Ethernet connection from a
network, refer to Appendix C for step by step instructions.
