Page 94
AES67
The iVAM2-2 Brooklyn II can be configured for AES67 operation. AES67 operation
with Dante is limited to eight or less receive and transmit channels at 48 kHz
sample rates.
24 bit linear (L24) encoding and 1 msec packet time are fixed default transmit
parameters.
16 bit (L16) or 24 bit (L24) encoding and 125/250/333/100 µsec packet times can
be received.
The
Device View - AES67 Config
menu enables/disables AES67.
Figure B–6: AES67 Enable/Disable
Further, Dante AES67 discovery and operational protocol requires manual
assignments for static multicast transmit and receive IP addresses per Dante
protocols for discovery and IGMP network operation. Destination addresses in range
239.nnn.0.0 – 239.nnn.255.255, port 5004 o nnn can be configured using the
Dante Controller. The default is 69. The destination and receive address range must
match. Provisions for this are in
Dante Controller Device View - Network
Config
. Refer to Figure B-7.
