Page 11
to update software.
Rear Panel
The rear panel is shown in Figure 2-2.
Figure 2-2: iVAM2-2 Rear Panel Layout
Power Connection
:
The iVAM2-2 receives power from an AC inlet, which is a standard
IEC receptacle for 100 to 240 VAC ±10%, 50/60 Hz power connection. Four regional AC
power cords, supplied according to shipping region, are available.
1.
SDI Inputs
: These two BNC connectors accept the two 3G/HD/SD-SDI
input signals containing audio and video to be monitored. This is a
standard feature.
2.
SDI Output
: This BNC connector outputs the selected 3G/HD/SD-SDI or
SFP module input signal.
3.
HDMI Output
: An HDMI output of the monitored 3G/HD/SD-SDI or SFP
module video source is available from this connection.
4.
Network Port
:
This Ethernet port can connect to either a LAN or to a PC
to let you perform administrative tasks remotely. The Wohler Web GUI is
described in Chapter 4 of this manual. Third party equipment, connecting to
the iVAM2-2 via a LAN plugged into this port and using an API commands, can
view and change product options, as well. This API is described in Appendix E
of this manual.
Important:
By design, the supplied AC mains power cord will only plug into a
three-prong grounded outlet for your safety. If the plug does not fit
into the outlet, contact an electrician to replace the obsolete outlet.
