WNQ freebeat xbike, User Manual

Page: 28 / 32

28
MAINTENANCE & CARE
CLEANING: Wipe down the bike using a damp cloth.
LEVELING FEET:
If the bike rocks back and forth, turn
each leveling foot clockwise (when viewed from above)
until it rests firmly on the ground.
EVERY 3 TO 5 RIDES
CLEANING: Clean the bike thoroughly using a damp
cloth and a mild household cleaner diluted in water.
Clean the touchscreen using an electronics wipe.
PEDALS:
Tighten any loose pedal with the included 15
mm wrench. Pedals should be tightened to 25 lb-ft of
torque. Turn clockwise to tighten the right pedal and
counterclockwise to tighten the left pedal.
AFTER RIDES
To ensure safe operation and optimal performance,
check for wear and damage and perform maintenance
on a regular basis. Replace any damaged or defective
parts immediately. Do not use the bike until the
repair is performed. Only use original parts from the
manufacturer. Changes or modifications to this unit not
expressly approved by freebeat could void the warranty.