WNQ freebeat xbike, User Manual

Page: 13 / 32

13
INSTALLATION
STABILIZER FEET ADJUSTMENT
The bike has adjustable stabilizer feet on each corner for
a steady, wobble-free installation. To ensure the bike is
level on the ground, adjust the stabilizer feet as follows:
Tighten the feet so they are screwed all the way into the
stabilizer.
Set the bike in its desired location.
Loosen the feet to remove all space between the
stabilizer feet and the floor.
Adjust each foot on both the front and rear stabilizer.
When the bike is level, lock the nut on all stabilizer feet.
CONNECTING THE POWER CABLES
Plug the power cable into the power adapter. Plug the
power adapter into the bike under the seat post, near
the rear stabilizer. Secure the power cable by using
either front-facing or rear-facing cable routing.