WNQ freebeat xbike, User Manual

Page: 12 / 32

12
INSTALLATION
BIKE PLACEMENT
Place the bike on a firm, flat and solid surface to prevent
the risk of tipping. Use a mat to keep the bike in place
and protect the floor. Allow a clearance of 24'' on all
sides of the bike for safety..
MOVING THE BIKE
Two people are required to transport the bike safely.
Make sure that the power cables are disconnected.
Using only handlebars, tilt the bike forward onto its
wheels. While holding on to handlebars, have a second
person lift the rear stabilizer. Carefully roll the bike to
the new location, avoiding uneven surfaces. If the bike
rocks after being set down, unscrew each stabilizer foot
until it rests firmly and steadily on the floor.