background image

06

IMPORTANT INFORMATION

Before using the equipment 
for exercise, check carefully to 
ensure that it has been correctly 
assembled.

Professional Installation

Correct Order

• 

Before using the equipment for 

exercise, please read the manual 
book carefully and familiarize all 
the functions of the equipment. 

• 

This machine is designed for 

adults, and children should not be 
allowed to play with it. Children 
playing can behave unpredictably 
and dangerously, for which the 
manufacturer cannot be held 
liable.

• 

The maximum payload is 100 

kg. It is not recommended that 
two or more people train on the 
machine at the same time.

• 

The flywheel is designed to be 

bi-directional so that it cannot be 
turned in a second. It has to press 
the brake button and then turn 
away.

• 

A slight noise of production 

on the belt or motor is due to the 
construction and has no negative 
effects upon operation. 

• 

Always check all screws and 

connectors and the respective 

safety precautions before use.

• 

Do not use corrosive or abrasive 

materials to clean the equipment. 
Make sure that these materials do 
not pollute the environment.

• 

The saddle and handle are 

designed as step-less adjustment, 
so please make sure the minimum 
insert depth is 55mm and fasten 
up. 

• 

To avoid injuries in case of 

emergencies, always make sure 
that you have enough space 
behind your exercise bike (min. 
2000 mm x 1000 mm). 

• 

Make sure that there are no 

others in the area of your exercise 
bike, as they may be injured.

• 

Always wear appropriate shoes 

and clothing when using the 
equipment. Do not wear loose 
clothing to avoid getting into the 
exercise bike. Barefoot, high-heeled 
shoes, and leather shoes are not 
permitted during the workout. If 
your foot slips off the footplate, 
please insert your foot into the 
plate cover.

• 

The resistance is adjusted by 

the applied force between the 
brakesheet and flywheel. You can 
rotate the brake button clockwise/ 

• 

Handle all packaging materials 

carefully to avoid any possible 
hazards. Children playing with plastic 
bags may cause a risk of suffocation.

• 

The equipment must be properly 

installed by an adult. If in doubt and 
help is needed, look for someone 
with technical skills. 

• 

Please install the equipment 

carefully and pay attention to your 
safety to avoid injuries caused by 
careless mishandling of tools. 

• 

 Open all individual parts and 

place them on the floor in order. To 
avoid scratches on the floor, place 
them on cardboard boxes.

• 

For technical reasons, we reserve 

the right to perform the preliminary 
installation work.(e.g., install the 
plug). 

• 

Fix all parts with screws but do 

not lock them first. Then check 

Summary of Contents for freebeat xbike

































Reviews: