98
4.
At the end of the brewing process, the freshly prepared
coffee beverage is ready. The used coffee grouts are
collected in the built-in grouts collector
12
. All the key
lights are reactivated again and the display shows the
“Ready” message. The machine is ready for the next
brewing operation.
7.6.3
Quantity pre-selection
If you wish to prepare several cups
one after the other
, you
can repeat each beverage selection automatically up to
12
times
. By using the two-cup function
2x
and quantity
pre-selection you can, for example, prepare 12 x 2 = 24
beverages one after the other.
Once the first brewing has started, the quantity pre-
selection (number) of beverages to be dispensed can be
increased or decreased by pressing the
or
soft
key as appropriate.
In the example shown here, a Latte Macchiato was selected
and the quantity increased to 6 using quantity pre-selection.
The display shows the pre-selection and progress of brew-
ing (in this example: the first of six brews is taking place).
Six brewing cycles are now carried out, one after the other.
Remember to place a fresh cup under the combination
spout each time. The quantity pre-selection can be altered
while brewing is in progress. Once all the brews have been
completed, the “Ready” message appears again in the dis-
play.
7.6.4
Manual input
The machine is equipped with a manual input
3
for
ground
coffee to prepare additional coffee beverages (e.g. mild
coffee or decaffeinated coffee). To use the manual input,
proceed as follows:
1.
The machine is ready and the following message ap-
pears in the display. Place the appropriate container be-
neath the combination spout. Then press the
soft
key to unlock the manual input
3
.
Summary of Contents for combiNation S/S4/ESeries 8600
Page 5: ...84 2 3 5 6 7 8 9 10 11 17 15 4 12 13 1 16 14 18 ...
Page 75: ...154 ...
