WMF combiNation S/S4/ESeries 8600 Operating Instructions Manual Download Page 25 | Manualshive

Page: 25 / 75

WMF combiNation S/S4/ESeries 8600 Operating Instructions Manual Download Page 25

104

To reset the complete daily counter to zero, press the

soft key. Following display appears:

Press

again to confirm that you want to zero the coun-

ter.
The complete counter (for all the beverages) is cleared
now.

Would you just like to zero the counter of a special bever-
age, press directly the soft key of this special beverage, e.g.
the

Cup coffee

soft key.

The following display appears:

To reset the counter to zero, press the

soft key.

7.11

Waiter accounting system

Your WMF combiNation

S

can be fitted with a WMF Waiter

Accounting System or in conjunction with an accounting
system.

The coffee machine is equipped with a waiter lock

14

and

connected to the accounting unit. Beverages are released by
inserting authorised waiter keys and, if table numbers are
in use, by inputting a table number in the machine display.
Beverages dispensed for each waiter or table number are
calculated via the external accounting system or the
WMF Multicounter (only when table numbers are not in
use).

The following modes are available:

Debit mode (waiter self-service):

The waiter inserts the authorised waiter key and, if ap-
propriate, enters the table number in order to dispense
beverages. If table numbers are in use, the following
display appears upon inserting the waiter key:

«
...
23
24
25
26
27
...
»

Summary of Contents for combiNation S/S4/ESeries 8600












































































Reviews:

No comments