140
Dismantle the combination spout
7
and clean it thoroughly
under running warm water (until the water runs clear).
Clean the ducts using the pipe cleaner (order no. 33 0350
0000) and cleaning brush supplied (order no. 33 1521
9000).
Next, place
all
loose parts (including the pipecleaner,
cleaning brush, milk intake hose, nozzle and connector) in
a cleaning solution
for at least 5 hours
. To prepare the
cleaning solution, place 5 ml WMF special cleaner (order
no. 33 0683 6000) from the measuring bottle in a container
with 0.5 l hand-hot water and mix the solution.
The parts
must be completely covered by the cleaning solution.
After this time, the parts are sterile. Please take care not to
introduce any new germs during the steps that follow.
Re-assemble the combination spout
7
in the reverse order
and fit it to the machine. Do this by pressing down at the
same time on the two levers that project to the left and right
behind the cap. Then replace the cap on the frother and
attach the milk intake hose.
Before the machine´s next operation the combination
spout
7
has to be cleaned thoroughly with clear water.
Summary of Contents for combiNation S/S4/ESeries 8600
Page 5: ...84 2 3 5 6 7 8 9 10 11 17 15 4 12 13 1 16 14 18 ...
Page 75: ...154 ...