manualshive.com logo in svg

WMF combiNation S/S4/ESeries 8600, Operating Instructions Manual, Page: 63 / 75

Share
Download
WMF combiNation S/S4/ESeries 8600 Operating Instructions Manual Download Page 63

 

142 

Further recommendations: 

 

•

 

If operational reasons do not allow time for the five-
hour thorough cleaning, we recommend purchasing a 
second combination spout. 
 

•

 

It is advisable in any case and especially with low 
throughput or when using uncooled milk to carry out 
intermediate cleaning after four to six hours’ operation. 

 

•

 

Never use left-over milk from the day before for froth-
ing. 

 

 

 
 

10.1.3

 

Intermediate cleaning the combination spout  

 

 

Important!

 

 

For hygiene reasons all surfaces which come into 
contact with milk must be thoroughly cleaned at 
least once a day. In addition, the milk intake 
hose 

16

 should be replaced at regular intervals. 

 

 

 

 

 

The machine is ready for operation and the following dis-
play is shown:  
 
By pressing the 

 soft key you will enter a second level 

with a selection menu which allows you to carry out clean-
ing of the combination spout. 

 

 

 

 

 

If you have allocated access authorisations (PIN numbers) 
(see chapter 8.5 on page 124), on pressing the 

 soft 

key you will be asked for your PIN number. Key in your 
PIN number. When the correct PIN number is input, the 
selection menu is displayed. 

 

 

 

 

 

If you wish to carry out cleaning of the combination spout, 
press the 

 soft key in the selection menu. 

 
 

 

 

 

 

 

In the next menu you can choose whether you want to 
clean the machine 

Machine

 or the foamer 

Foamer

 (combina-

tion spout. To clean the combination spout, press the 

Foamer

 

soft key. 

 

 

 

 

 

Summary of Contents for combiNation S/S4/ESeries 8600












































































Reviews:

No comments