13
User Manual WMF 2000 S
Operation
2.7
Steam Milk (optional) /
Dual Milk (optional)
The milk is automatically heated or foamed.
The Steam Milk buttons can be assigned to up to four milk
foam quality levels, or to hot milk.
The Steam Milk buttons are assigned at the factory to
three foam quality levels (superfine, fine, standard) and hot
milk.
Heat milk or foam milk
Fill a tall, narrow container with the desired milk
quantity
Do not fill the container above the halfway point, so that
the milk will not run over when it foams.
Insert the steam nozzle deep into the milk
Briefly press the desired Steam Milk button
Steam is discharged, depending on the Steam Milk button
assignment.
Steam dispensing ends after reaching the set temperature,
or when the Steam Milk button is pressed again.
Wipe steam outlet with a damp cloth
Override function (optional)
Function is adjusted upon request by WMF Service.
Milk and foam can boil over if the temperature is set to
90 °C, or when the override function is used.
Press and hold the desired Steam Milk button
Steam is dispensed for as long as the button is held
pressed.
Wipe steam outlet with a damp cloth
The maximum temperature setting is 90 °C.
Steam Milk buttons
Button allocation
w
Software
w
Settings
w
Recipe and buttons
page 28
w
Change recipes
page 29
Hot surfaces.
Burn hazard.
Scalding hazard.
Observe the Safety chapter.
Do not overheat milk when
foaming, otherwise foam volume
decreases.
