background image

44

User Manual WMF 1100 S

Software | Beverages

Descaling

The water hardness, flow rate, and whether a water 
filter is used are the factors that determine the number 
of litres remaining before descaling is required. This 
litres indication is calculated and displayed by the 
WMF 1100 S.

Brewer care

After 15,000 brewing cycles, the O-ring on the brewer 
needs to be replaced.
When the service life has been exceeded, the fact that 
it is due for replacement is reported daily.

 

™

Replace O-ring

 

™

Confirm the change

5.4  Beverages

General information

Dispensing test

For many beverage settings, it is possible to start 
a dispensing test with the new settings before the 
recipe is saved.

 

™

Modify the settings as desired

 

™

Touch the “Dispensing test” pad

The beverage is dispensed using the newly changed 
values.

 

™

If the beverage is as desired, touch the Save symbol

The recipe is saved.

Save recipes

The modified recipe is saved here.

DS_03_04_01_07

Descaling

Descaling chapter  

w

 starting on page 78

DS_03_04_01_05

Brewer care

Brewer care

DI_getr

espresso

Touch the desired beverage button

Espresso

Cappuccino

Café Crème

Latte Macchiato

Ristretto

Milk coffee

DI_05_01_00_00

Example: cappuccino button

Summary of Contents for 1100S





















































































































Reviews: