WMF 1100S User Manual Download Page 87

Page: 87 / 116

User Manual WMF 1100 S

Care | Manual cleaning

7.6.9 Clean the milk system manually

Scalding hazard

• Risk of injury of beverage is started

accidentally.

> Always switch off the coffee machine prior to

cleaning.

> Disconnect mains plug.

Perform a milk system rinsing

Remove the cover in front of the spouts

Remove the milk foamer with the steam nozzle

Disassemble the individual components and clean
them thoroughly under warm running water

Clean the guide in the spout with a damp cloth

Clean the channels and connections with the
included cleaning brush

Health hazard

• In case of eye contact, the WMF milk system

cleaner can cause severe eye injury.

> Ensure that the milk system cleaner never

makes contact with the eyes of a person or
animal.

Mix 5 ml of WMF special cleaner with 0.5 litres of
warm drinking water

Place all components, including the cleaning brush,
in the prepared cleaning solution

All parts must be completely immersed in the cleaning
solution.

CAUTION

Follow the Safety chapter

starting on page 7

CAUTION

Follow the Safety chapter

starting on page 7

Clean the milk system manually

Note

The milk hose must also be placed in
the cleaning solution when needed.
Follow the manual.
Immerse the milk hose

Description below

Summary of Contents for 1100S





















































































































Search results

Summary of Contents for 1100S

Reviews:

Related manuals for 1100S

Brands by name

Popular brands

WMF 1100S, User Manual

Search results

Summary of Contents for 1100S

Reviews:

Related manuals for 1100S

Brands by name

Popular brands